Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the front seat of an Opel Corsa

Model: Vauxhall Corsa Corsa B - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Seat

See other generations:
This video is currently unavailable

Let’s look at how to remove the front seat of an Opel Corsa. Enter the vehicle and see what needs to be removed.

Remove the plastic covers under the seat rails to access the securing screws. Move the seat back (using the metal handle) and raise the seat base, then unscrew the securing screws on the front rail with a socket wrench.

Move the seat forward after removing the front securing screws and remove the securing screws from the rear of the rail. Disconnect any connectors for the front seat power supply.

Fit a new seat with the associated screws and plastic covers.


Updated on 13 April 2026 by ScegliAuto


Related tutorials

Removing the Boot Lock on an Opel Corsa C
Removing the Boot Lock on an Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) In this video, we will discover the steps to remove and replace the boot lock on an Opel Corsa C, third series, following the instructions below. Fir…
How to Adjust and Remove the Front Headrest of the Opel Corsa
How to Adjust and Remove the Front Headrest of the Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) This guide will show you how to adjust and remove the front seat headrest of the Opel Corsa. First, get into the cabin and press the side button on t…
Removing the Wing Mirror on an Opel Corsa
Removing the Wing Mirror on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) In this video tutorial, you will learn how to remove the external rear-view mirror on an Opel Corsa. The video shows the removal of the door panel at…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos