Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Door Panel on Opel Meriva B

Model: Vauxhall Meriva Meriva B, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Door trim panel

See other generations:
Video tutorial

Use a small flathead screwdriver to remove the small plastic cover near the opening handle, prying it in the gap. Then repeat the process to remove the plastic from the central handle (also that at its base). Also, remove the window lift handle and undo all the screws now exposed.

Carefully pull off the panel to avoid damaging the clips, and disconnect the cables in the process. Proceed in reverse order until fully reassembled.

If you remove the front panels, you will also need to disconnect the window switch.


Updated on 13 April 2026 by ScegliAuto


Related tutorials

How to remove the rear door lock in the Opel Meriva?
How to remove the rear door lock in the Opel Meriva?
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) In this tutorial we can see how to disassemble the rear door lock in the Opel Meriva, a very simple operation. First of all, we open the door in whic…
Instructions for Removing the Rear Window Regulator on an Opel Meriva
Instructions for Removing the Rear Window Regulator on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) In this guide, you will see instructions on how to remove the rear window regulator mechanism of a first-generation Opel Meriva. First, open the rear…
Replacement of the trunk opening button of the Opel Meriva.
Replacement of the trunk opening button of the Opel Meriva.
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) In this guide we will see the main instructions that will allow us to disassemble and replace the trunk opening button of the Opel Meriva. First of a…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos