Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Injector Replacement on Opel Vivaro

Model: Vauxhall Vivaro MK 1 - Years 2001-2014
Part: Fuel injectors

As clearly shown in the video, to replace an injector, you need to obtain a specific injector extraction tool to unscrew them. A crucial step is to spray a good amount of WD-40 (or similar spray) at the base of the injector, where it enters the engine block; otherwise, you will struggle to free it. It is also recommended to take a photo of the serial number of the injectors before removing them, as you will need it if you have to reprogram them using the appropriate Opel software.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the engine light and the injector malfunction warning on the Opel Vivaro.
How to reset the engine light and the injector malfunction warning on the Opel Vivaro.
Vauxhall Vivaro (2001-2014 / MK 1) In this guide, we will see the instructions that will allow us to reset the engine malfunction light, specifically the injector malfunction warning f…
Where are the fuses located on the Opel Vivaro?
Where are the fuses located on the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) On the Opel Vivaro, you can find all the fuses divided within the appropriate fuse boxes installed in the vehicle: in this type of car, there are two…
Where are the fuses of the Opel Vivaro located?
Where are the fuses of the Opel Vivaro located?
Vauxhall Vivaro (2014-2019 / MK 2) The fuse boxes of the Opel Vivaro are responsible for containing the fuses that regulate the operation of the devices inside the vehicle. On this mod…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos