Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Position Light Bulbs on the Opel Astra H

Model: Vauxhall Astra Astra H - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight bulb

See other generations:
Video tutorial

This guide shows how to replace the position lights on the Opel Astra H. To perform the replacement, the first step is to turn the wheel on the opposite side to the one you are working on, to expose the wheel arch panel. Detach the two clips securing the cover that allows access to the headlights.

After removing the rubber cap that protects the inside of the lamp, you can replace the bulbs. The position lights are rated at 5W. Test the correct operation before refitting them, by turning on the vehicle lights.

Reassemble as you disassembled, but in reverse order.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Vauxhall Astra (2004-2010 / Astra H) The following instructions will allow us to disassemble and replace the bulbs of the rear light of the Opel Astra. First, we open the rear tailgate o…
Vauxhall Astra (2004-2010 / Astra H) In this tutorial, you will see how to replace the interior light bulbs in the Opel Astra H, a very simple and quick operation. For this, you will nee…
Vauxhall Astra (2004-2010 / Astra H) Today, we will go through the steps to remove and replace the bulbs in the rear interior light, as well as the courtesy lights, of an Opel Astra. Fir…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos