Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb on the Opel Corsa D

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

In this video tutorial, learn how to remove and replace the front headlight bulb on the Opel Corsa D by following the instructions below. First, open the bonnet of your car and start by removing the plastic protective cap of the bulb found at the back of the headlight; if you are on the intake side, it will be necessary to remove the hose and air filter box to access it. At this point, disconnect the electrical connector of the bulb and unclip the metal spring; finally, remove the bulb and replace it with a new one (in this case, type H7)!


Updated on 20 April 2026 by ScegliAuto


Related tutorials

Removing the Front Headlamp Bulbs on an Opel Corsa
Removing the Front Headlamp Bulbs on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Are the car headlamp bulbs damaged? Let's look at removing the faulty bulbs from the headlamps of an Opel Corsa. Lift the front bonnet of the car and…
How to Change the Headlight Bulbs on an Opel Corsa
How to Change the Headlight Bulbs on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Open the bonnet by pulling the lever located at the bottom right of the dashboard (secure it with the prop rod). Locate the inspection cap of the hea…
Replace Front Headlight Bulbs on Opel Corsa
Replace Front Headlight Bulbs on Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Are the bulbs in your Opel Corsa blown and need replacing? Here’s how to change them in the front headlight. Open the front bonnet by pulling the lev…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos