Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Conditioning Fan Resistor on the Opel Corsa D

Model: Vauxhall Corsa Corsa D - Years 2006-2014

In this tutorial video, we will see how to remove and replace the air conditioning fan resistor on the Opel Corsa D, following the instructions below. First, remove the glove compartment from your car, also taking off the lower side plastic; inside, you will find the air conditioning fan, where the resistor is located, as shown in the video. Now disconnect the electrical connector and unscrew the fixing screw to remove it and replace it with the new one; now check the operation of the fan!

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Air Conditioning Fan Resistor on the Opel Corsa C
Replacing the Air Conditioning Fan Resistor on the Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) In today's tutorial video, you will learn how to remove and replace the air conditioning fan resistor on the Opel Corsa C, following the instructions…
Removing the Blower Resistor on Opel Corsa
Removing the Blower Resistor on Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) See how to remove the blower resistor from an Opel Corsa D. Locate the blower resistor under the glove compartment on the passenger side. Unscrew the…
Replacement of the cabin fan resistor of the Opel Corsa.
Replacement of the cabin fan resistor of the Opel Corsa.
Vauxhall Corsa (2006-2014 / Corsa D) Below we will see the information regarding the disassembly and replacement of the cabin fan resistor of the Opel Corsa. First, we open the front doo…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos