Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Opel Corsa D 1.3 CDTI

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Service warning light

In this short guide, you will learn how to reset the service light for the regular maintenance oil change on the Opel Corsa D 1.3 CDTI in simple steps. First, get into the vehicle and press and hold the brake pedal and the right button on the instrument panel simultaneously, as shown in the video; this will cause the oil light to start flashing, until it turns off and resets completely. Now turn off the ignition and start the engine, checking that the oil change light has reset completely!

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the serpentine belt on an Opel Corsa C 1.3 CDTi
Replacing the serpentine belt on an Opel Corsa C 1.3 CDTi
Vauxhall Corsa (2000-2006 / Corsa C) In today's tutorial, you will see how to remove and replace the serpentine belt on an Opel Corsa C with a 1.3 CDTi engine. First, lift the vehicle an…
Resetting the Service Light on an Opel Corsa C
Resetting the Service Light on an Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) To reset the service light on an Opel Corsa C, simply follow the steps in this short video. Note that the same procedure is used to reset the service…
Removing Alternator from Opel Corsa 1.3 CDTI
Removing Alternator from Opel Corsa 1.3 CDTI
Vauxhall Corsa (2006-2014 / Corsa D) In this video tutorial, you will see the main instructions for removing the alternator from an Opel Corsa 1.3 CDTI. First, open the bonnet and discon…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos