Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key Battery on an Opel Adam

Model: Vauxhall Adam MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

Video tutorial

Replacing the key battery on an Opel Adam is extremely simple, and we will demonstrate it now. Start by removing the upper cover by detaching it by hand, as clearly shown in the video. Done! At this point, get a small flat screwdriver and pry underneath it, extracting it from its housing.

Insert the new battery you purchased, which corresponds to the one removed: it is a CR2032 and can easily be found in hardware stores or large supermarkets, costing very little. Refit the cover and test the key's operation.

If the car still does not open, it means the problem lies elsewhere.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

What Does Error Code 16 Mean on an Opel Adam?
What Does Error Code 16 Mean on an Opel Adam?
Vauxhall Adam (2013-2019 / MK 1) Error code 16 on an Opel Adam indicates a fault with the brake light; this error is communicated to the instrument cluster and can be resolved by rep…
How to Replace the Remote Battery of the Opel Adam?
How to Replace the Remote Battery of the Opel Adam?
Vauxhall Adam (2013-2019 / MK 1) To replace the battery of the Opel Adam remote, press the button located on the top of the device to lift the key blade. This will allow you to lever…
Where is the OBD port of the Opel Adam located?
Where is the OBD port of the Opel Adam located?
Vauxhall Adam (2013-2019 / MK 1) In the following guide, we will explain step by step how you can locate the OBD port inside your Opel Adam in a few seconds. First of all, go inside …

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos