Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port of the Opel Adam located?

Model: Vauxhall Adam MK 1 - Years 2013-2019
Part: Dashboard

In the following guide, we will explain step by step how you can locate the OBD port inside your Opel Adam in a few seconds. First of all, go inside the car and turn off the engine if it is still running, then shift your attention to the lower part of the dashboard, specifically to the side area. At this point, all you have to do is locate the OBD port you were looking for and you have successfully completed the task. If necessary, you can connect a diagnostic tool to the OBD port in question as long as it is perfectly compatible with your Opel Adam.

Posted on 2 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses of the Opel Adam located?
Where are the fuses of the Opel Adam located?
Vauxhall Adam (2013-2019 / MK 1) The fuses of the Opel Adam are contained inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will be poss…
Where are the fuses located in the Opel Adam?
Where are the fuses located in the Opel Adam?
Vauxhall Adam (2013-2019 / MK 1) The fuses in the Opel Adam are contained within the designated fuse boxes inside the vehicle: the first can be found behind the glove compartment on …
How to Replace the Gear Knob on an Opel Adam
How to Replace the Gear Knob on an Opel Adam
Vauxhall Adam (2013-2019 / MK 1) To replace the gear knob on an Opel Adam, lift the entire plastic panel that surrounds the lever to access the components underneath. Specifically, y…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos