Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for removing the boot button on Opel Meriva B

Model: Vauxhall Meriva Meriva B, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Push button

See other generations:
Video tutorial

In this video, we will see the instructions that will allow you to remove and replace the tailgate opening button on an Opel Meriva B, second series. First, open the tailgate and remove its plastic panel by unscrewing the securing screws; once removed, you can take off the outer panel by unscrewing the socket screws with a 6mm and 8mm socket.

At this point, disconnect the electrical connector of the lock and then remove the boot opening button, replacing it with the new original spare part!


Updated on 5 May 2026 by ScegliAuto


Related tutorials

Instructions for Disassembling the Clutch on an Opel Meriva 1.4 Turbo Petrol
Instructions for Disassembling the Clutch on an Opel Meriva 1.4 Turbo Petrol
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) In this video, find the main instructions on how to disassemble the clutch on an Opel Meriva 1.4 Turbo Petrol. First, lift the vehicle and remove the…
Replacement of the trunk opening button of the Opel Meriva.
Replacement of the trunk opening button of the Opel Meriva.
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) In this guide we will see the main instructions that will allow us to disassemble and replace the trunk opening button of the Opel Meriva. First of a…
How to Replace the Front Headlight Bulb on an Opel Meriva
How to Replace the Front Headlight Bulb on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) In this guide, you will find instructions to remove and replace the front headlight bulb on an Opel Meriva by following these simple steps. First, op…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos