Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Heating Radiator of the Opel Vectra

Model: Vauxhall Vectra Vectra B, MK 2 - Years 1995-2002
Part: Heater core

This guide shows the procedure necessary to dismantle and replace the heating radiator of the Opel Vectra's cabin. First, get inside the vehicle on the front passenger side and start by removing the plastic cover located at the bottom; then, dismantle the centre tunnel and the lower part of the instrument panel by removing the gaiter and the gear knob. Once you locate the radiator, disconnect the pipes and unscrew the screws to remove the entire matrix, as shown in the video; apply the reverse procedure for reassembly!

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Cabin Heater Radiator on an Opel Vectra
Guide to Replacing the Cabin Heater Radiator on an Opel Vectra
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) In this short and simple guide, we will go through the steps to remove and replace the cabin heater radiator on an Opel Vectra. First, get into the v…
Replace the Heating Radiator on Opel Vectra
Replace the Heating Radiator on Opel Vectra
Vauxhall Vectra (1995-2002 / Vectra B, MK 2) Is the heating in your Opel Vectra malfunctioning? Here’s how to remove it. Remove the plastic covering of the centre tunnel using appropriate plasti…
How to Replace the Radiator on an Opel Vectra
How to Replace the Radiator on an Opel Vectra
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) Below are the main instructions to remove and replace the cooling radiator on an Opel Vectra. First, open the bonnet of your car and start by removin…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos