Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Opel Grandland X?

Model: Vauxhall Grandland X MK 1 - Years 2017-2024
Part: Service warning light

To reset the Service light on the Opel Grandland X, press and hold the CHECK button located in the centre of the instrument cluster. While holding the button, turn the key to switch on the instrument cluster. The display will show a spanner icon with a countdown: when the countdown finishes, it will return to the initial screen. At this point, check that the reset was successful by turning the instrument cluster off and then back on with the key.

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on an Opel Grandland X?
How to Reset the Service Light on an Opel Grandland X?
Vauxhall Grandland X (2017-2024 / MK 1) To reset the Service light on an Opel Grandland X, press and hold the CHECK button located in the centre of the instrument cluster. While holding the…
How to Reset the Service Light on an Opel Grandland X?
How to Reset the Service Light on an Opel Grandland X?
Vauxhall Grandland X (2017-2024 / MK 1) To reset the Service light on an Opel Grandland X, press and hold the CHECK button located in the centre of the instrument panel. While holding the b…
How to Reset the Service Light on the Opel Grandland X?
How to Reset the Service Light on the Opel Grandland X?
Vauxhall Grandland X (2017-2024 / MK 1) To reset the Service light on the Opel Grandland X, turn on the ignition to ensure that the maintenance light is illuminated. To turn it off, rotate …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos