Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on the Opel Corsa

Model: Vauxhall Corsa Corsa B - Years 1993-2000
Part: Timing belt

To replace the timing belt on the Opel Corsa, lift the car to access the bolts securing the right front wheel. Remove the wheel along with the inner wheel arch cover to access the internal components. Here, you can loosen the central bolt of the pulleys to reduce the tension on the belt. This will allow you to slide it out of its position, enabling you to insert a new replacement part. After installation, refit all previously removed components.

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the timing belt of the Opel Corsa
Guide to replacing the timing belt of the Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Today's main information will show us the process of disassembling and replacing the timing belt of the Opel Corsa. First, we lift the car and start …
Guide to Replacing the Timing Belt of the Opel Corsa 1.2
Guide to Replacing the Timing Belt of the Opel Corsa 1.2
Vauxhall Corsa (2019-2026 / Corsa F) Today, discover the main steps that will guide you on how to remove and replace the timing belt of the Opel Corsa 1.2. First, raise the vehicle and s…
How to Replace the Timing Belt on an Opel Corsa?
Vauxhall Corsa (1993-2000 / Corsa B) To replace the timing belt on an Opel Corsa, open the bonnet and access the components located on the left side of the engine block. Remove any obstr…

Other guides you may be interested in

    Frequently Asked Questions

    • Corsa 2019-2026 - How much does the timing chain cost and how often should it be changed on an Opel Corsa in the UK? Read answer
    • Corsa 2006-2014 - Opel Corsa timing chain replacement price? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos