Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Side Indicator Bulb

Model: Vauxhall Corsa Corsa B - Years 1993-2000
Part: Side marker bulb

Replacing the side indicator bulb is very simple; however, special care is needed when disengaging the light unit from the wing, as it is secured by a plastic tab. Simply push the light unit forward to compress the tab and extract the light unit. Next, remove the bulb holder by twisting it (bayonet fitting) and pull out the old bulb (T5 fitting). Insert the new bulb, reattach the bulb holder to the light unit, and then attach the light unit back to the wing, first inserting the rear part and then securing the front tab.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Indicator Bulb on the Opel Corsa
Replacing the Indicator Bulb on the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Below are the main steps to remove and replace the front indicator bulb on the Opel Corsa. First, open the bonnet by pulling the internal lever, and …
How to Replace the Front Indicator Bulb on an Opel Corsa
How to Replace the Front Indicator Bulb on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before you can begin, open the bonnet of your Opel Corsa. Start by turning the base of the blown bulb anti-clockwise to remove it from its housing. N…
Replacement of Side Indicator Bulb
Replacement of Side Indicator Bulb
Vauxhall Corsa (2006-2014 / Corsa D) Once the front bonnet is open, there is enough space to reach the bulb of the front indicator; the bulb holder has a convenient tab that allows you t…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos