Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Rear Door Handle of the Opel Insignia Mk1

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Handle

See other generations:
Video tutorial

This guide shows how to replace the external handle of the rear door of the Opel Insignia Mk1. The first operation is to open the door and remove the plastic cover at the lock height. Using a Torx T20 screwdriver, unscrew the locking pin of the lock cylinder and pull it out. Pull the handle and push it towards the rear of the vehicle to unlock the first catch, then rotate it towards the front of the vehicle to remove the second catch.

To fit the new handle, simply insert the end of the handle into the corresponding hole and then insert the part that will contact the lock cylinder. Refit the lock cylinder and screw in the bolt.

Check the proper functioning.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Remove the Front Door Panel of the Opel Insignia
How to Remove the Front Door Panel of the Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) These brief and simple instructions will show you the procedure for removing and replacing the front door panel of the Opel Insignia. First, open the…
Removing the Door Panel on an Opel Insignia
Removing the Door Panel on an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) In this brief guide, you will learn how to remove and replace the front door panel on an Opel Insignia. First, open the front door and start by remov…
Removing the Door Panel on an Opel Insignia
Removing the Door Panel on an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Now, let's look at removing the left rear door panel on an Opel Insignia. Disconnect the battery terminals located in the engine bay. Using a screwdr…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos