Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Valve Lifters

Model: Vauxhall Astra Astra G - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Engine

See other generations:
Video tutorial

In the engine of the vehicle in question, the valve operation is performed through so-called lifters actuated by the camshaft: the continuous rubbing of the cams on the top of the lifters tends to wear them out, and therefore they must be replaced. Lubricate the lifter seats generously and insert the new ones; lubricate the camshaft housings and the respective mounting brackets to install them by tightening the pins with a torque wrench according to a cross pattern.

Then install the camshaft oil seals with the lip facing inwards before securing the timing pulleys; align the timing marks and finally insert the timing belt.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Where is the EGR Valve Located in the Vauxhall Astra?
Where is the EGR Valve Located in the Vauxhall Astra?
Vauxhall Astra (2004-2010 / Astra H) In this video, see where the EGR valve is located in the Vauxhall Astra, useful if you need to remove it for cleaning or replacement. As shown, the v…
Valve Stem Seal Replacement
Valve Stem Seal Replacement
Vauxhall Astra (1998-2006 / Astra G) Valve stem seals are a part of your vehicle's maintenance. The following guide shows how to replace this part. Although it may seem difficult at firs…
Where is the EGR valve located in the Opel Astra?
Where is the EGR valve located in the Opel Astra?
Vauxhall Astra (2009-2016 / Astra J) In this video, you can see where the EGR valve is located in the Opel Astra and how to proceed if you need to remove it. As shown, the valve is posit…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos