Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Pollen Filter on an Opel Corsa

Model: Vauxhall Corsa Corsa B - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Cabin air filter

See other generations:
Video tutorial

In this video tutorial, you will see how to replace the pollen filter on an Opel Corsa by following a few simple steps: first, purchase a new pollen filter. Next, get inside the vehicle, turn off the engine, and pull the handbrake.

The pollen filter is located under the bonnet, so remove the rubber cap from the wiper arm nut and lubricate the nut with WD-40 spray; then, loosen the nut using a 13 mm socket and remove the wiper arm. Unscrew the fasteners using an 8 mm socket and remove the grille under the windscreen; take off the seal and unscrew the fasteners with a 24 mm socket.

Remove the old cabin filter; place the new air filter following the arrows on the filter itself.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How to Replace the Pollen Filter on an Opel Corsa
How to Replace the Pollen Filter on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Before starting, open the bonnet of your Opel Corsa. Begin by removing the cover located beneath the front wipers by unscrewing the relevant fixing s…
How to Remove and Replace the Pollen Filter on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) How to remove and replace the pollen filter on an Opel Corsa? Open the glove compartment and unscrew the perimeter screws; rotate the glove box forwa…
Replacing the Pollen Filter on Opel Corsa E
Replacing the Pollen Filter on Opel Corsa E
Vauxhall Corsa (2014-2019 / Corsa E) To access the cabin air filter, or pollen filter, on the Opel Corsa E, first remove the glove compartment. Unscrew the four screws that secure it, tw…

Other guides you may be interested in

    Frequently Asked Questions

    • Corsa 2006-2014 - Where is the cabin filter of the Opel Corsa 2008 located? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos