Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Warning Light with the Spanner Symbol on the Opel Corsa?

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Key

See other generations:
Video tutorial

To reset the warning light in question, proceed as follows: Press and hold the A button, with the ignition off, on the wiper stalk (model with onboard computer), or at the bottom left next to the speedometer (model without onboard computer). After 3 seconds, a message will appear saying "InspO"; then press the brake pedal and turn on the ignition, while still holding the A button.

The aforementioned message will flash for a few seconds and will then be replaced by the message "InspxxxxxKm". At this point, release the brake pedal, the A button, and turn the ignition off and back on. The operation can be considered complete.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How to reset the tire warning light on the 2013 Opel Corsa D.
How to reset the tire warning light on the 2013 Opel Corsa D.
Vauxhall Corsa (2006-2014 / Corsa D) To correctly perform the manual reset of the tire warning light on your Opel Corsa D (year 2013), you just need to follow the procedure outlined in t…
How to reset the tyre warning light on the Opel Corsa D?
How to reset the tyre warning light on the Opel Corsa D?
Vauxhall Corsa (2006-2014 / Corsa D) After restoring the tyre pressure due to a puncture or the natural deflation of the tyres over time, you need to manually reset the low pressure warn…
How to Reset the Tyre Pressure Warning Light on the Opel Corsa
How to Reset the Tyre Pressure Warning Light on the Opel Corsa
Vauxhall Corsa (2019-2026 / Corsa F) In this article, we will see how to reset the tyre pressure warning light on the Opel Corsa. To reset this light, first, start the ignition; after st…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos