Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Air Filter

Model: Vauxhall Corsa Corsa B - Years 1993-2000
Part: Air filter

The engine air filter housing (airbox) is located at the front left of the engine bay (when viewed from the front): therefore, unscrew the fixing screws of the cover located along the edges (once fully unscrewed, the screws remain housed in the cover, so there is no need to remove them), disconnect the mass air flow sensor and lift the cover to extract the old filter. Remove any dirt present in the housing, taking care not to let it fall into the intake duct, insert the new filter ensuring the gasket adheres correctly to the edges, and reassemble the cover by tightening the respective fixing screws and reconnecting the mass air flow sensor.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Air Filter on an Opel Corsa
Replacing the Air Filter on an Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) .. Let’s look at replacing the engine air filter on an Opel Corsa. Open the car door, pull up the bonnet release lever l.. …
Replacement of Engine Air Filter
Vauxhall Corsa (2000-2006 / Corsa C) The engine air filter housing is located at the front left of the engine bay (when viewed from the front); first, disconnect the intake duct located …
Replacing Air Filter on Opel Corsa
Replacing Air Filter on Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Do you want to replace the air filter on an Opel Corsa? Lift the bonnet and see how to replace the air filter. Open the car's door, pull up the engin…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos