Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Reverse Light Bulb on an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light bulb

See other generations:
Video tutorial

To access the rear light bulbs on the Opel Mokka, it is not necessary to remove the light; simply remove a small cover located on the side of the rear bonnet. First, ensure the engine is off and disconnect the battery terminals.

Then, fully lift the rear bonnet and remove the small side plastic cover using a flat screwdriver (or similar tool). Once removed, locate and unscrew the faulty bulb and replace it with a new compatible model.

Finally, reposition the cover and close the bonnet. Don’t forget to reconnect the battery.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

What Does the "MIL" Light Mean on an Opel Mokka?
What Does the "MIL" Light Mean on an Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) When the "MIL" (Malfunction Indicator Lamp) light activates on the dashboard of your Opel Mokka, it indicates a general malfunction with the emission…
How do you replace the headlight bulb of the Opel Mokka?
How do you replace the headlight bulb of the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) The replacement of the headlight bulb of the Opel Mokka can be done by opening the hood, so that access to the components inside the engine compartme…
How to Change the Cabin Air Filter on the Opel Mokka X
How to Change the Cabin Air Filter on the Opel Mokka X
Vauxhall Mokka (2012-2019 / Mokka A) If you want to discover how to correctly change the cabin air filter of your Opel Mokka X, then you are in the right place. In the following guide, y…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos