Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Corsa
    4. : How to remove the radiator of the Opel Corsa

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa B - Years 1993-2000
Part: Radiator
Operation: How to remove the radiator of the Opel Corsa

Let's see in this guide the instructions on how to disassemble and replace the cooling radiator of the Opel Corsa. First we open the engine hood of our car and start disconnecting the electrical connector of the radiator fan; after which we disconnect the coolant pipes, loosening the metal clamp, letting the fluid drain into a container. At this point we unscrew the fixing screws of the fan and those of the radiator, in order to remove them from the engine compartment; we replace the radiator and reassemble everything, following the video tutorial to the end!


Posted on 20 September 2022 by ScegliAuto

    Frequently Asked Questions

    • Corsa 2014-2019 - Why is the radiator fan of the Opel Corsa not working anymore? Read Answer
    • Corsa 2006-2014 - Where is the cooling fan relay located in the Opel Corsa d? Read Answer
    • Corsa 2006-2014 - Where is the coolant temperature sensor in the Opel Corsa d? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos