Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brakes on the Opel Zafira

Model: Vauxhall Zafira Zafira A, T98, MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Brake pads

See other generations:
Video tutorial

In today's video, see how to replace the brake pads on the Opel Zafira. First, ensure the vehicle is stationary so that the parts needing attention are cool.

If available, use a ramp to lift the vehicle. Start by removing the tyre from its position, then proceed to dismantle the brake components using the appropriate tools.

Install the necessary components and fit them back into their places. Once done, lower the vehicle and complete the job.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Opel Zafira
How to reset the service light on the Opel Zafira
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) Resetting the service light on the 2011 Opel Zafira is a simple task performed after each service. First, press and hold the button located below the…
How to reset the Service light on the Opel Zafira?
How to reset the Service light on the Opel Zafira?
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) Resetting the Service light on the Opel Zafira, specifically the Opel Zafira B, is very simple and immediate. Here’s the correct method: press and ho…
How to Reset the Maintenance Light on the Opel Zafira B
How to Reset the Maintenance Light on the Opel Zafira B
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) This article explains how to reset the maintenance light on the Opel Zafira B. This procedure takes less than 1 minute to complete and should only be…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos