Do it yourself
Frequently asked questions about cars and motorcycles

Replacing Front Brake Pads

Model: Vauxhall Zafira Zafira A, T98, MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Brake pads

See other generations:
Video tutorial

Once the vehicle is lifted and the wheel you want to work on is removed, you can see the brake caliper housing the pads, which is installed with a hinge system that makes removal very simple. Before proceeding, it is advisable to lever with a medium-sized flat screwdriver on the old pads to slightly retract the piston and facilitate their extraction.

At this point, loosen the caliper fixing bolt located at the bottom, behind the caliper itself, and rotate it completely upwards to free the pads. Then remove the anti-noise pad and the rear pad, and disconnect any wear sensor cable.

Using the appropriate clamp, fully retract the piston to create space for the new pads, which are thicker. Place the pads in their designated slots in the caliper (the position is dictated by the appropriate geometry of the slot), then lower the caliper and secure it by tightening the respective fixing bolt.

Reconnect any wear sensor cable and proceed to remount the wheel. Before driving off, remember to pump the brake pedal until it offers appropriate resistance, thus correctly repositioning the cylinder.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Vauxhall Zafira (1999-2005 / Zafira A, T98, MK 1) Once the vehicle is lifted and the wheels are removed, unscrew the retaining pins of the brake caliper from its support and remove it from its seat; …
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) First, remove the wheel on which you will perform the replacement. Ensure your vehicle is lifted and supported on appropriate stands. Next, loosen th…
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) Learn how to adjust the rear seats of an Opel Zafira. This video explains how to proceed. First, remove the curtain panel located in the boot, grasp …

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos