Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the "insp" Service Light on Opel Corsa

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Warning light – error code

To reset the "insp" service light on an Opel Corsa, follow this procedure. With the ignition off, press the brake pedal fully and hold it down. At the same time, locate and press the button on the dashboard next to the speedometer and keep it pressed. Then turn the key and switch on the ignition, waiting at least ten seconds while holding down the brake pedal and the button on the dashboard. After ten seconds, the light will turn off. To verify the reset, switch off and then switch on the ignition again.

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Insp Light on an Opel Corsa?
How to Reset the Insp Light on an Opel Corsa?
Vauxhall Corsa (2000-2006 / Corsa C) To reset the Insp light on the Opel Corsa, close all the doors and keep the instrument panel off. Then, press the button located at the bottom right …
How to Reset the Insp Light on an Opel Corsa
How to Reset the Insp Light on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) In this video tutorial, learn how to reset the insp light on an Opel Corsa, model produced from 2006 to 2014. If this light comes on, it means it's t…
How to Reset the "insp" Message on an Opel Corsa
How to Reset the "insp" Message on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) To reset the "insp" message on your Opel Corsa, turn on the instrument cluster and note the message on the display, then proceed to reset it; turn of…

Other guides you may be interested in

    Frequently Asked Questions

    • Corsa 2014-2019 - What does error code B1485-2 indicate on an Opel? Read answer
    • Corsa 2014-2019 - What does the code 35 mean on the Opel Corsa? Read answer
    • Corsa 2000-2006 - How to enter the radio code on an Opel Corsa version C? Read answer
    • Corsa 2014-2019 - What does error code 24 on Opel Corsa mean? Read answer
    • Corsa 2019-2026 - Where to find the unlock code of the Opel Corsa car radio? Read answer
    • Corsa 2014-2019 - What does the Opel Corsa code 128 mean? Read answer
    • Corsa 2006-2014 - What does the flashing glow plug light on the Opel Corsa mean? Read answer
    • Corsa 2014-2019 - What does the code 21 of the Opel Corsa mean? Read answer
    • Corsa 2006-2014 - When does code 16 appear in the Opel Corsa? Read answer
    • Corsa 2014-2019 - What is code 89 in the Opel Corsa? Read answer
    • Corsa 2006-2014 - When does Code 84 appear on the Opel Corsa LPG? Read answer
    • Corsa 2014-2019 - What does it mean when the kpa warning light comes on on the Opel Corsa? Read answer
    • Corsa 2006-2014 - How to reset the engine failure warning light in the Opel Corsa? Read answer
    • Corsa 2019-2026 - What does code 23 mean on the Opel Corsa? Read answer
    • Corsa 2014-2019 - What does the Opel Corsa error code 68 mean? Read answer
    • Corsa 2014-2019 - What does error code 23 mean on my Opel Corsa? Read answer
    • Corsa 2014-2019 - What does the code 128 of the 2015 Opel Corsa mean? Read answer
    • Corsa 2014-2019 - What is code 55 in the Opel Corsa? Read answer
    • Corsa 2014-2019 - What does code 16 mean on the Opel Corsa? Read answer
    • Corsa 2019-2026 - What does error code 84 mean on my Opel Corsa? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos