Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the LPG Filter on an Opel Mokka?

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Checks and maintenance

Before proceeding with the filter replacement, ensure that the LPG system valve is closed and that all gas in the circuit has been discharged. Only then can you safely perform the replacement. Open the front bonnet of the car and locate the LPG filter. The video shows exactly where it is located within the engine compartment. Once found, disconnect it from the connecting pipes and its mounting point by removing the screws that hold it in place. Remove the old filter and insert the new one, reconnecting it to the pipes and securing it with screws.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Cabin Air Filter on the Opel Mokka X
How to Change the Cabin Air Filter on the Opel Mokka X
Vauxhall Mokka (2012-2019 / Mokka A) If you want to discover how to correctly change the cabin air filter of your Opel Mokka X, then you are in the right place. In the following guide, y…
How to Replace the Cabin Filter in an Opel Mokka?
How to Replace the Cabin Filter in an Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) To replace the cabin filter in an Opel Mokka, open the glove compartment on the passenger side and detach the side clips. Once removed, fully pull ou…
How to Remove the Petrol Filter on an Opel Mokka
How to Remove the Petrol Filter on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Before you start, engage first gear and activate the handbrake on your Opel Mokka. Begin by lifting the rear of the vehicle. This will give you acces…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos