Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the lock actuator on the Opel Corsa

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Door lock

In this short and simple guide we will see how to disassemble and replace the Opel Corsa lock actuator, following the instructions below. First of all, we open the front door and start disassembling and removing the door panel, unscrewing all the fixing screws; then we unscrew the screws of the lock that we find on the side, using a torx screwdriver, as shown in the video. At this point we use a 10mm socket wrench to unscrew the actuator screws, disconnecting the pin to remove and replace the lock with the new one!

Posted on 19 December 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you open the fuel door of the Opel Corsa when it is locked?
How do you open the fuel door of the Opel Corsa when it is locked?
Vauxhall Corsa (2006-2014 / Corsa D) When the fuel cap of the Opel Corsa is locked, it is possible that the mechanism controlling its actuator is damaged: therefore, the problem can be s…
How to replace the door lock module of the Opel Corsa.
How to replace the door lock module of the Opel Corsa.
Vauxhall Corsa (2006-2014 / Corsa D) The instructions in this guide will show us how to disassemble and replace the front door lock module of the Opel Corsa. First, we open the front doo…
How to Replace the Battery on an Opel Corsa
How to Replace the Battery on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) How do you maintain the battery on an Opel Corsa? This guide explains how to replace the battery: open the car's door and pull up the engine compartm…

How to Replace the Oil Sump on a Ford Focus

Follow these steps to remove and replace the oil sump on a Ford Focus engine. Lift the car on a column lift and (at your preferred height) use a socket wrench to unscrew the sump plug, allowing the oil to drain into a container (for disposal) and then re-screw the plug. Remove all the side plastics protecting the undercarriage using a battery or manual drill, then unscrew the fastening bolts around the perimeter of the oil sump. After removing the bolts from the sump, detach it from the engine block along with the gasket using a screwdriver as leverage. Clean everything and refit the new part.

Watch the video!


by ScegliAuto

More videos