Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Opel Astra

Model: Vauxhall Astra Astra G - Years 1998-2006
Part: Front bumper

Follow these main instructions to remove and replace the front bumper of the Opel Astra. First, open the bonnet of your car and start unscrewing the fastening screws located at the top and bottom of the front bumper; then use a Torx screwdriver to unscrew the fastening screws found on both sides of the front wheel arches, as shown in the video. At this point, gently unclip the bumper from the sides until it is completely removed; then refit the bumper by applying the reverse procedure!

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Fit the Front Bumper on an Opel Astra K
How to Fit the Front Bumper on an Opel Astra K
Vauxhall Astra (2015-2022 / Astra K) How do you fit the front bumper yourself? Let's see how to install the bumper on the Opel Astra. Position the front bumper perfectly on the vehicle b…
Removing the Rear Bumper from an Opel Astra
Removing the Rear Bumper from an Opel Astra
Vauxhall Astra (2004-2010 / Astra H) The following instructions will guide you on how to remove and replace the rear bumper of an Opel Astra in simple steps. First, open the rear tailgat…
Removing the Front Bumper on an Astra J
Removing the Front Bumper on an Astra J
Vauxhall Astra (2009-2016 / Astra J) Let's see how to remove the front bumper on an Opel Astra. Remove the bumper to replace it with a new one. Lift the car on a jack, then unscrew the s…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos