Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service, How to Change Engine Oil and Oil Filter

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Engine oil

Place a large, low container under the oil sump in line with the cap, unscrew the cap and let all the oil drain out. Use a spanner to unscrew the oil filter cap, replace the filter, place the new O-ring, and screw everything back in by hand, carefully, into its housing. Finish tightening it with the appropriate spanner, ensuring that the oil has finished draining; carefully screw the sump cap back on. At this point, you can pour in the new oil through the filler neck located above the engine. Check the level with the dipstick.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil Filter Replacement
Engine Oil Filter Replacement
Vauxhall Corsa (1993-2000 / Corsa B) Whenever you change the engine oil in your car, you must also replace the oil filter. The filter serves to purify the oil circulating from any impuri…
Replacement engine oil and oil filter on Opel Corsa D
Replacement engine oil and oil filter on Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) Today we will see how to replace the engine oil and the oil filter, performing the regular routine maintenance service, on an Opel Corsa D. First of …
How to Replace Oil and Filter on an Opel Corsa
How to Replace Oil and Filter on an Opel Corsa
Vauxhall Corsa (1993-2000 / Corsa B) Replacing oil and filter on an Opel Corsa. Here’s how to proceed: lift the car on a column lift (jack). Using a socket wrench, unscrew the large secu…

Other guides you may be interested in

How to Change the Fog Light Bulb on a BMW 3 Series

Watch this video to learn how to replace the fog light bulb on a BMW 3 Series. Once you lift the car with a column lift and remove the wheel, prepare to take off the splash shield around the side fender of the car. Remove the plastic rivets with a metal pry tool, then unscrew the pins and the underbody of the bumper. Now that you have access to the back of the fog light, remove the damaged bulb and install a new one (same size and voltage). Reinstall the lower panel and the splash shield under the vehicle. Test the lights to ensure they work properly.

Watch the video!


by ScegliAuto

More videos