Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Vauxhall
  4. :
  5. Corsa
  6. : How do you reset the tire pressure warning light on the Opel Corsa?

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Checks and maintenance
Operation: How do you reset the tire pressure warning light on the Opel Corsa?

The operation of resetting the tire pressure warning light on the Opel Corsa is done by first inflating the tires, bringing them back to the correct inflation pressure: the correct pressure value is indicated on the sticker attached to the driver's door pillar. Once the tires have been inflated, a diagnostic tool must be connected to the vehicle's OBD port: this will allow the selection of the specific car model and corresponding version. The error that causes the warning light to come on can be reset, allowing the light to turn off.


Posted on 6 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Corsa 2006-2014 - How to open the stuck fuel tank cap of the Opel Corsa? Read Answer
    • Corsa 2000-2006 - What problems does the Opel Corsa 1.2 C version have? Read Answer
    • Corsa 2014-2019 - What does code 23 indicate on the Opel Corsa E? Read Answer
    • Corsa 2014-2019 - What does code 68 indicate on the Opel Corsa E? Read Answer
    • Corsa 2006-2014 - What does code 23 indicate on the Opel Corsa? Read Answer
    • Corsa 2014-2019 - What does code 20 identify in the Opel Corsa? Read Answer
    • Corsa 2014-2019 - What are the error codes for the Opel Corsa? Read Answer
    • Corsa 2014-2019 - What does code 23 indicate on the Opel Corsa? Read Answer
    • Corsa 2006-2014 - What does the Insp warning light on the Opel Corsa indicate? Read Answer
    • Corsa 2014-2019 - What does the term "Tire learn" on the Opel Corsa indicate? Read Answer
    • Corsa 2006-2014 - What does the "code 84" error indicate in the Opel Corsa? Read Answer
    • Corsa 2014-2019 - What does the "Tire learn" label on the Opel Corsa indicate? Read Answer
    • Corsa 2000-2006 - Where should the jack be positioned on the Opel Corsa C? Read Answer
    • Corsa 2014-2019 - What does it mean when the tire pressure warning light turns on in an Opel Corsa E? Read Answer
    • Corsa 2014-2019 - What does the message "code 35" indicate in the Opel Corsa? Read Answer
    • Corsa 2014-2019 - How do you reset the service light on the Opel Corsa? Read Answer
    • Corsa 2014-2019 - What does code 89 on the Opel Corsa indicate? Read Answer
    • Corsa 2014-2019 - What are the issues with the Opel Corsa E 1.3 cdti? Read Answer
    • Corsa 2019-2026 - What does the EPS light indicate in the Opel Corsa? Read Answer
    • Corsa 2006-2014 - What to do if the hood of the Opel Corsa does not open? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos