Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil service light on the Vauxhall Meriva?

Model: Vauxhall Meriva MK 2, Meriva B - Years 2010-2017
Part: Service warning light

In this tutorial, you will see how to reset the oil service light on the Vauxhall Meriva, a very simple and quick operation to be performed only after completing all required scheduled maintenance work. Start by inserting the key and turning on the ignition, then press the "Menu" button on the left-hand control stalk and navigate to the screen displaying the word "Reset". Once done, hold the "SET/CLR" button at the end of the same stalk for about 5 seconds, or for as long as necessary for the oil life to reset correctly.

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service light on the Opel Meriva
Resetting the service light on the Opel Meriva
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) Briefly, we will see the instructions to reset the service light for the regular maintenance oil change on the Opel Meriva. First, get into the cabin…
How to Reset the Service Light in an Opel Meriva?
How to Reset the Service Light in an Opel Meriva?
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) As the service interval approaches, the first series Opel Meriva will alert you via the Service light, which is shaped like a spanner. If you decide …
How to Reset the Service Light on the Opel Meriva A
How to Reset the Service Light on the Opel Meriva A
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) When the service light on your Opel Meriva A remains on even after servicing the vehicle, you need to manually reset the light. First, get into the c…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos