Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Meriva
    4. : How to replace the remote control cover of the Opel Meriva?

Vauxhall Meriva - Video tutorial

Model: Vauxhall Meriva Meriva A, MK 1 - Years 2003-2010
Part: Key
Operation: How to replace the remote control cover of the Opel Meriva?

In this tutorial we can see how to replace the Opel Meriva remote control cover, very simple operation. To do this, we will need a small flat-tipped screwdriver as well as the right spare. First of all we identify the slot on the back of the remote control, then insert the screwdriver inside, separate the two parts by levering and extract the sensor located on the back of the metal key. At this point we can open the push-button panel, extract both the battery and the circuit and insert them in the replacement cover. We follow the reverse procedure to put everything back together.


Posted on 4 September 2022 by ScegliAuto

    Frequently Asked Questions

    • Meriva 2010-2017 - What to do if the central locking system does not work on an Opel Meriva? Read Answer
    • Meriva 2003-2010 - How do you replace the battery in the Opel Meriva remote control? Read Answer
    • Meriva 2010-2017 - How much does the duplicate key of the Opel Meriva cost? Read Answer
    • Meriva 2010-2017 - What problem does the Opel Meriva have in the central locking? Read Answer
    • Meriva 2003-2010 - Why does the ignition lock of the Opel Meriva not work? Read Answer
    • Meriva 2010-2017 - How to replace the key shell on my Opel Meriva b? Read Answer
    • Meriva 2003-2010 - How much does it cost to duplicate the key of the Opel Meriva? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos