Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Mirror on an Opel Meriva

Model: Vauxhall Meriva Meriva A, MK 1 - Years 2003-2010
Part: Side mirror

Use a plastic lever and pry at the back of the mirror, gradually pulling it from its housing (in other words, leverage between the glass and the mirror shell). To perform this operation more easily, you can adjust the mirror using the appropriate controls. Work slowly until you extract the glass; once done, disconnect the two small rear connectors. After cleaning the inside of the shell and the connectors with compressed air, proceed to install the new mirror: connect the connectors and simply press it into place, securing it with the clips.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the external rearview mirror of the Opel Meriva
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) Below we will see the instructions useful for disassembling and replacing the external rearview mirror of the Opel Meriva. First, we open the front d…
How to Replace the External Mirror on an Opel Meriva?
How to Replace the External Mirror on an Opel Meriva?
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) To replace the external mirror on an Opel Meriva, first remove the corresponding door panel. Once detached, disconnect the mirror connector from its …
Removing the External Mirror of the Opel Meriva
Removing the External Mirror of the Opel Meriva
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) This guide illustrates the main steps to remove and replace the external mirror of the Opel Meriva. First, open the front door and begin removing the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos