Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Meriva
    4. : Outside rearview mirror

Vauxhall Meriva - Outside rearview mirror

Vauxhall Meriva (2010-2017 / Merivab, MK 2)
Disassembling the external rearview mirror of the Opel Meriva.
Today's guide will show us the main steps that will allow us to disassemble and replace the external rearview mirror of the Opel Meriva. First, we open the …read all…
Posted on 5 February 2024 by ScegliAuto
Vauxhall Meriva (2010-2017 / Merivab, MK 2)
How do you replace the external rearview mirror of the Opel Meriva?
To replace the rearview mirror of the Opel Meriva, you need to use an object to lever off the cover on the back. Once the cover is removed, you can loosen the …read all…
Posted on 16 January 2024 by ScegliAuto
Vauxhall Meriva (2010-2017 / Merivab, MK 2)
How do you replace the external rearview mirror of the Opel Meriva?
In order to replace the external rearview mirror of the Opel Meriva, you need to first remove the corresponding door panel: once this is detached, it will be …read all…
Posted on 14 September 2023 by ScegliAuto
Vauxhall Meriva (2010-2017 / Merivab, MK 2)
Instructions for removing the external rearview mirror Opel Meriva B
In today's video we will see the instructions that will allow us to disassemble the exterior mirror of an Opel Meriva B, second series. First of all we open …read all…
Posted on 21 March 2024 by ScegliAuto
Vauxhall Meriva (2003-2010 / Merivaa, MK 1)
Replacement exterior mirror on Opel Meriva
Use a plastic lever and pry the rear of the mirror by pulling it out of its seat a little at a time (in other words, pry between the glass and the mirror …read all…
Posted on 23 January 2024 by ScegliAuto
Vauxhall Meriva (2010-2017 / Merivab, MK 2)
How to remove the mirror cover on Opel Meriva
Let's see how to proceed with the removal of the mirror cap on Opel Meriva. With a screwdriver we unscrew the screw located under the car mirror (if present); …read all…
Posted on 13 November 2023 by ScegliAuto
Vauxhall Meriva (2010-2017 / Merivab, MK 2)
How to remove the exterior mirror of the Opel Meriva B
The external rearview mirror of the second generation of Opel Meriva, called B and available on the market starting from 2010, is applied directly on the door …read all…
Posted on 2 October 2023 by ScegliAuto
Vauxhall Meriva (2003-2010 / Merivaa, MK 1)
How to replace the rearview mirror of the Opel Meriva
If, when crossing another vehicle, the external rear-view mirrors come into contact, only the mirror can be broken: this spare part can also be purchased in …read all…
Posted on 7 September 2023 by ScegliAuto
Airbags (1) Alternator (5) Antenna (2) Car stereo (6) Battery (5) Spark plugs (4) Glow plugs (1) Bodywork (1) Control unit (1) Key (14) Timing belt (9) V-belt (4) -board computer (5) Checks and maintenance (46) Gearshift gaiter (2) Brake discs (1) Headlight (3) Tail light (1) Fog lights (1) Air filter (6) Cabin air filter (16) Petrol filter (1) Diesel filter (5) Oil filter (1) Hand brake (1) Clutch (4) Side turn signal light bulb (2) Headlight bulb (19) Rear light bulb (4) License plate light (2) Handle (2) Window motor (1) Starter motor (3) Engine oil (1) Door panel (9) Front bumper (5) Rear bumper (2) Brake pads (10) Hydraulic pistons (2) Gear Shift Knob (1) Pump (4) Fuel pump (2) Push button (3) Instrument cluster (9) Radiator (2) Fuse box (23) Seat (2) Parking sensors (1) Lock (1) Lambda sensor (1) Outside rearview mirror (8) Windscreen wipers (2) Thermostat (1) Valve (1) Side window (2) Steering wheel (2)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos