Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Vauxhall
  4. :
  5. Meriva
  6. : Antenna

Vauxhall Meriva - Antenna

Vauxhall Meriva (2003-2010 / Merivaa, MK 1)
Removing the antenna on Opel Meriva

How do you remove the rear antenna of the car? Let's see how to remove the antenna and the plastic covering the car roof. We disassemble the plastics of the …read all…
Posted on 5 February 2024 by ScegliAuto
Vauxhall Meriva (2003-2010 / Merivaa, MK 1)
Disassembly of the Opel Meriva antenna

In this video tutorial we will see how to disassemble the car radio antenna in an Opel Meriva. You can also follow this video if you want to remove the antenna …read all…
Posted on 14 December 2023 by ScegliAuto

Airbags (1) Alternator (5) Antenna (2) Car stereo (6) Battery (5) Spark plugs (4) Glow plugs (1) Bodywork (1) Control unit (1) Key (14) Timing belt (9) V-belt (4) -board computer (5) Checks and maintenance (46) Gearshift gaiter (2) Brake discs (1) Headlight (3) Tail light (1) Fog lights (1) Air filter (6) Cabin air filter (16) Petrol filter (1) Diesel filter (5) Oil filter (1) Hand brake (1) Clutch (4) Side turn signal light bulb (2) Headlight bulb (19) Rear light bulb (4) License plate light (2) Handle (2) Window motor (1) Starter motor (3) Engine oil (1) Door panel (9) Front bumper (5) Rear bumper (2) Brake pads (10) Hydraulic pistons (2) Gear Shift Knob (1) Pump (4) Fuel pump (2) Push button (3) Instrument cluster (9) Radiator (2) Fuse box (23) Seat (2) Parking sensors (1) Lock (1) Lambda sensor (1) Outside rearview mirror (8) Windscreen wipers (2) Thermostat (1) Valve (1) Side window (2) Steering wheel (2)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos