Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Meriva
    4. : Crankshaft position sensor

Vauxhall Meriva - Crankshaft position sensor

Crankshaft Position Sensor Vauxhall Meriva (2010-2017 / mk 2, meriva b)

Vauxhall Meriva (2010-2017 / MK 2, Merivab)
How to clean the crankshaft sensor of an Opel Meriva
Let's see where the RPM sensor of an Opel Meriva is located: it is actually in a standard position, near the crankshaft pulley, in the engine block and …Read all…
Posted on 25 September 2025 by ScegliAuto
Airbag (3) Alternator (6) Shocks (1) Antenna (2) Air conditioning (2) Car stereo (8) Battery (3) Spark plugs (5) Glow plugs (1) Body (1) Control unit (1) Key (21) Timing belt (10) V-belt (6) Onboard computer (5) Checks and maintenance (20) Dashboard (4) Shifter boot (3) Brake rotors (1) Headlight (8) Tail light (3) Fog lights (2) Air filter (9) Cabin air filter (17) Fuel filter (2) Diesel fuel filter (6) Oil filter (1) Parking brake (3) Clutch (4) Side marker bulb (2) Headlight bulb (21) Tail light bulb (7) License plate light (4) Handle (3) Engine (1) Power window motor (1) Starter motor (4) Transmission fluid (1) Engine oil (2) Clock (4) Door trim panel (12) Front bumper (5) Rear bumper (2) Brake pads (10) Hydraulic pistons (2) Shift knob (4) Pump (5) Fuel pump (3) Push button (4) Instrument cluster (3) Radiator (2) Fuse box (42) Seat (2) Crankshaft position sensor (1) Engine coolant temperature sensor (1) Parking sensors (1) Door lock (3) Oxygen sensor (1) Side mirror (10) Warning light – error code (29) (7) Tire pressure warning light (2) Service warning light (53) Fuel cap (1) Windshield wipers (2) Thermostat (2) Valve (1) EGR valve (2) Side window (1) Steering wheel (3)

How to replace the gear knob in the Peugeot 3008?

In this tutorial, see how to replace the gear knob in the Peugeot 3008, a very simple and quick operation. First, enter the cabin, then using a plastic spatula, unclip the base of the gaiter by prying along the perimeter. Next, lift the gaiter itself, disconnect the indicated connector and pull the knob off the shaft with force upwards. At this point, simply cut the retaining strap, attach the replacement to the gaiter with a new strap and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos