Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Meriva
    4. : Control unit

Vauxhall Meriva - Control unit

Control Unit Vauxhall Meriva (2003-2010 / meriva a, mk 1)

Vauxhall Meriva (2003-2010 / Merivaa, MK 1)
How to Replace the ECU on an Opel Meriva
Before starting, open the bonnet of your Opel Meriva and disconnect the battery to work safely. The ECU is located on the right side of the cylinder head. …Read all…
Posted on 3 May 2026 by ScegliAuto
Airbag (3) Alternator (6) Shocks (1) Antenna (2) Air conditioning (2) Car stereo (7) Battery (3) Spark plugs (5) Glow plugs (1) Body (1) Control unit (1) Key (21) Timing belt (10) V-belt (6) Onboard computer (5) Checks and maintenance (20) Dashboard (4) Shifter boot (3) Brake rotors (1) Headlight (8) Tail light (3) Fog lights (2) Air filter (9) Cabin air filter (17) Fuel filter (2) Diesel fuel filter (6) Oil filter (1) Parking brake (3) Clutch (4) Side marker bulb (2) Headlight bulb (21) Tail light bulb (7) License plate light (4) Handle (3) Engine (1) Power window motor (1) Starter motor (4) Transmission fluid (1) Engine oil (2) Clock (4) Door trim panel (12) Front bumper (5) Rear bumper (2) Brake pads (10) Hydraulic pistons (2) Shift knob (4) Pump (5) Fuel pump (3) Push button (4) Instrument cluster (3) Radiator (2) Fuse box (42) Seat (2) Crankshaft position sensor (1) Engine coolant temperature sensor (1) Parking sensors (1) Door lock (3) Oxygen sensor (1) Side mirror (10) Warning light – error code (29) (7) Tire pressure warning light (2) Service warning light (53) Fuel cap (1) Windshield wipers (2) Thermostat (2) Valve (1) EGR valve (2) Side window (1) Steering wheel (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos