Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Vauxhall
  4. :
  5. Meriva
  6. : Front bumper

Vauxhall Meriva - Front bumper

Vauxhall Meriva (2003-2010 / Merivaa, MK 1)
How to disassemble the front bumper of an Opel Meriva?

To remove the front bumper of an Opel Meriva, start by lifting the hood and locate the upper fixing screws of the bumper, usually located under the front part …read all…
Posted on 3 May 2024 by ScegliAuto
Vauxhall Meriva (2003-2010 / Merivaa, MK 1)
How to remove the front headlight and bumper of the Opel Meriva.

Let's briefly go over the instructions that will allow us to disassemble and replace the front headlight and bumper of the Opel Meriva. First, we open the …read all…
Posted on 7 August 2023 by ScegliAuto
Vauxhall Meriva (2003-2010 / Merivaa, MK 1)
How to disassemble the front bumper of the Opel Meriva

If we need to remove the front bumper of our car, we will find all the indications and execution methods in the description below. After opening the bonnet it …read all…
Posted on 28 November 2022 by ScegliAuto
Vauxhall Meriva (2010-2017 / Merivab, MK 2)
How to mount the front bumper of the Opel Meriva B

When installing a new bumper, before proceeding with the relative painting, a preliminary assembly is suggested to check that it fits correctly in its seats …read all…
Posted on 18 September 2023 by ScegliAuto
Vauxhall Meriva (2010-2017 / Merivab, MK 2)
Replacement front bumper Opel Meriva B

If the front bumper has to be replaced due to a breakage that prevents it from being repaired, it is often a question of whether to buy a competitor part …read all…
Posted on 12 September 2023 by ScegliAuto

Airbags (1) Alternator (5) Antenna (2) Car stereo (6) Battery (5) Spark plugs (4) Glow plugs (1) Bodywork (1) Control unit (1) Key (14) Timing belt (9) V-belt (4) -board computer (5) Checks and maintenance (46) Gearshift gaiter (2) Brake discs (1) Headlight (3) Tail light (1) Fog lights (1) Air filter (6) Cabin air filter (16) Petrol filter (1) Diesel filter (5) Oil filter (1) Hand brake (1) Clutch (4) Side turn signal light bulb (2) Headlight bulb (19) Rear light bulb (4) License plate light (2) Handle (2) Window motor (1) Starter motor (3) Engine oil (1) Door panel (9) Front bumper (5) Rear bumper (2) Brake pads (10) Hydraulic pistons (2) Gear Shift Knob (1) Pump (4) Fuel pump (2) Push button (3) Instrument cluster (9) Radiator (2) Fuse box (23) Seat (2) Parking sensors (1) Lock (1) Lambda sensor (1) Outside rearview mirror (9) Windscreen wipers (2) Thermostat (1) Valve (1) Side window (2) Steering wheel (2)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos