Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Meriva
    4. : How to disassemble the front bumper of the Opel Meriva

Vauxhall Meriva - Video tutorial

Model: Vauxhall Meriva MK 1, Meriva A - Years 2003-2010
Part: Front bumper
Operation: How to disassemble the front bumper of the Opel Meriva

If we need to remove the front bumper of our car, we will find all the indications and execution methods in the description below. After opening the bonnet it is necessary to remove the front grille by undoing the screws located above. Then it is necessary to release the fixing clips of the internal mudguard of the two front wheels. It is then necessary to lift the car at the front to remove the fastening hooks from the lower part of the bumper. Then we proceed to unscrew the Allen nuts located on the upper profile of the bumper. At this point we can release the bumper starting from the sides by pulling it towards us and we will have completed the disassembly.


Posted on 28 November 2022 by ScegliAuto



How to remove the front headlight and bumper of the Opel Meriva.
Vauxhall Meriva (2003-2010 / MK 1, Meriva A) Let's briefly go over the instructions that will allow us to disassemble and replace the front headlight and bumper of the Opel Meriva. First, we ope
Removal of the rear bumper on Opel Meriva
Vauxhall Meriva (2003-2010 / MK 1, Meriva A) Do we want to remove the rear bumper of an Opel Meriva? We disassemble the bumper to replace it or to assemble / disassemble the tow hook etc. Lift t
How to mount the front bumper of the Opel Meriva B
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) When installing a new bumper, before proceeding with the relative painting, a preliminary assembly is suggested to check that it fits correctly in it

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos