Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit the Front Bumper of the Opel Meriva B

Model: Vauxhall Meriva Meriva B, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Front bumper

See other generations:
Video tutorial

When installing a new bumper, before proceeding with painting, perform a preliminary fitting to ensure it sits correctly in its mounts and that the gaps at the junction with the front headlights and wings are uniform; this bumper also integrates the front grille and must be secured to the slam panel, beneath the wings and along the lower edge; once you are certain that the mounting points align, proceed with preparing and painting the bumper, which is supplied with primer.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Removing the Rear Bumper on an Opel Meriva
Removing the Rear Bumper on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Do you want to remove the rear bumper from an Opel Meriva? Remove the bumper to replace it or to install/remove the tow bar, etc. Lift the tailgate, …
How to Properly Install Parking Sensors on an Opel Meriva
How to Properly Install Parking Sensors on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Installing parking sensors on your vehicle? In this video, learn how to properly install parking sensors on an Opel Meriva. First, take measurements …
How to Remove the Front Headlight and Bumper on the Opel Meriva
How to Remove the Front Headlight and Bumper on the Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Let's briefly go over the instructions to remove and replace the front headlight and bumper on the Opel Meriva. First, open the bonnet and start by r…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos