Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper on an Opel Meriva

Model: Vauxhall Meriva Meriva A, MK 1 - Years 2003-2010
Part: Rear bumper

Do you want to remove the rear bumper from an Opel Meriva? Remove the bumper to replace it or to install/remove the tow bar, etc. Lift the tailgate, unscrew the securing screws located at the top of the bumper, then remove the screws located at the sides of the wheel arch liners. Check for securing screws at the bottom of the bumper. Once the bumper is free from any screws, grasp it with your hands and pull it away from the bodywork (disconnect any power cables). Replace the bumper if damaged.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight of the Opel Meriva?
How do you replace the headlight of the Opel Meriva?
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) Here is the procedure for disassembling the tail light of the Opel Meriva. The available video guide explains how to indirectly disassemble it, with …
Replacing the Rear Light Bulbs on the Opel Meriva
Replacing the Rear Light Bulbs on the Opel Meriva
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) Below are the instructions to replace the rear light bulbs on the Opel Meriva. First, open the rear hatch of the boot and start by removing the side …
Replacing the Rear Light Bulb on the Opel Meriva
Replacing the Rear Light Bulb on the Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Today, we will see in this video tutorial how to remove and replace the rear light bulb on the Opel Meriva in simple and quick steps. First, open the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos