Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of an Opel Meriva

Model: Vauxhall Meriva Meriva B, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Rear bumper

See other generations:
Video tutorial

Before starting, open the boot of your Opel Meriva. Begin by unfastening and removing the side storage compartments inside the boot, then unscrew and remove the nuts securing the rear lights to the vehicle and disconnect the electrical connectors.

Next, unscrew and remove the screws that fix the rear bumper to the chassis, located along its perimeter. Once done, unclip and remove the retaining clips, and you will have freed the rear bumper.

Proceed by unclipping and removing the bumper itself, then take it off. When you have completed this last step, you will have finished the removal.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

Removing the Rear Bumper on an Opel Meriva
Removing the Rear Bumper on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Do you want to remove the rear bumper from an Opel Meriva? Remove the bumper to replace it or to install/remove the tow bar, etc. Lift the tailgate, …
How to Remove the Front Headlight and Bumper on the Opel Meriva
How to Remove the Front Headlight and Bumper on the Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Let's briefly go over the instructions to remove and replace the front headlight and bumper on the Opel Meriva. First, open the bonnet and start by r…
How to Remove the Front Bumper on an Opel Meriva
How to Remove the Front Bumper on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) If you need to remove the front bumper of your vehicle, the following description provides all the instructions and execution methods. After opening …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos