Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Bumper Replacement for Opel Meriva B

Model: Vauxhall Meriva Meriva B, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Front bumper

See other generations:
Video tutorial

If you need to replace the front bumper due to damage that prevents repair, you may be torn between purchasing an aftermarket part or an original one, or perhaps a used one. The original part certainly comes at a high price, and both the aftermarket and used options will require repainting, so do not overlook the latter option.

However, the aftermarket part is certainly a valid solution, but before repainting, it is advisable to perform a fitting test to ensure it aligns perfectly and that the gaps at the wing joints, under the headlights, and beneath the bonnet are precise and uniform.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlight and Bumper on the Opel Meriva
How to Remove the Front Headlight and Bumper on the Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Let's briefly go over the instructions to remove and replace the front headlight and bumper on the Opel Meriva. First, open the bonnet and start by r…
Removing the Rear Bumper on an Opel Meriva
Removing the Rear Bumper on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Do you want to remove the rear bumper from an Opel Meriva? Remove the bumper to replace it or to install/remove the tow bar, etc. Lift the tailgate, …
Removal and Replacement of the Front Headlamp on the Opel Meriva
Removal and Replacement of the Front Headlamp on the Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) In this video, see how to replace the front headlamp on the Opel Meriva version A: follow these steps. Turn the front wheels inwards, one then the ot…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos