Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Meriva
    4. : Side window

Vauxhall Meriva - Side window

Vauxhall Meriva (2010-2017 / Merivab, MK 2)
What does the message "Code 60" indicate in the Opel Meriva?
If the message "Code 60" appears on the dashboard of our Opel Meriva, it means that the side window on the passenger side is not calibrated correctly. This …read all…
Posted on 8 May 2024 by ScegliAuto
Vauxhall Meriva (2010-2017 / Merivab, MK 2)
How to disassemble the front window lifter in the Opel Meriva?
In this tutorial, we can see how to disassemble the front window regulator in the Opel Meriva, a very simple operation. Before proceeding, we must also have …read all…
Posted on 2 November 2023 by ScegliAuto
Airbags (1) Alternator (5) Antenna (2) Car stereo (6) Battery (5) Spark plugs (4) Glow plugs (1) Bodywork (1) Control unit (1) Key (14) Timing belt (9) V-belt (4) -board computer (5) Checks and maintenance (46) Gearshift gaiter (2) Brake discs (1) Headlight (3) Tail light (1) Fog lights (1) Air filter (6) Cabin air filter (16) Petrol filter (1) Diesel filter (5) Oil filter (1) Hand brake (1) Clutch (4) Side turn signal light bulb (2) Headlight bulb (19) Rear light bulb (4) License plate light (2) Handle (2) Window motor (1) Starter motor (3) Engine oil (1) Door panel (9) Front bumper (5) Rear bumper (2) Brake pads (10) Hydraulic pistons (2) Gear Shift Knob (1) Pump (4) Fuel pump (2) Push button (3) Instrument cluster (9) Radiator (2) Fuse box (23) Seat (2) Parking sensors (1) Lock (1) Lambda sensor (1) Outside rearview mirror (8) Windscreen wipers (2) Thermostat (1) Valve (1) Side window (2) Steering wheel (2)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos