Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Vauxhall
  4. :
  5. Meriva
  6. : Radiator

Vauxhall Meriva - Radiator

Vauxhall Meriva (2010-2017 / Merivab, MK 2)
How to replace the radiator of the Opel Meriva 2

The replacement of the radiator of your Opel Meriva B requires special attention during the various steps. Thanks to the following guide, you will be able to …read all…
Posted on 26 April 2024 by ScegliAuto
Vauxhall Meriva (2003-2010 / Merivaa, MK 1)
Replacing the radiator on Opel Meriva

How to remove the radiator of the Opel Meriva? We lift the front hood and begin to disassemble the protective plastics (bumpers). We remove the plastic of the …read all…
Posted on 11 February 2024 by ScegliAuto

Airbags (1) Alternator (5) Antenna (2) Car stereo (6) Battery (5) Spark plugs (4) Glow plugs (1) Bodywork (1) Control unit (1) Key (14) Timing belt (9) V-belt (4) -board computer (5) Checks and maintenance (46) Gearshift gaiter (2) Brake discs (1) Headlight (3) Tail light (1) Fog lights (1) Air filter (6) Cabin air filter (16) Petrol filter (1) Diesel filter (5) Oil filter (1) Hand brake (1) Clutch (4) Side turn signal light bulb (2) Headlight bulb (19) Rear light bulb (4) License plate light (2) Handle (2) Window motor (1) Starter motor (3) Engine oil (1) Door panel (9) Front bumper (5) Rear bumper (2) Brake pads (10) Hydraulic pistons (2) Gear Shift Knob (1) Pump (4) Fuel pump (2) Push button (3) Instrument cluster (9) Radiator (2) Fuse box (23) Seat (2) Parking sensors (1) Lock (1) Lambda sensor (1) Outside rearview mirror (8) Windscreen wipers (2) Thermostat (1) Valve (1) Side window (2) Steering wheel (2)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos