Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wing Mirror on an Opel Meriva

Model: Vauxhall Meriva Meriva A, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Side mirror

See other generations:
Video tutorial

If the external wing mirrors come into contact with another vehicle, the mirror glass may break: you can purchase this replacement in the aftermarket, ensuring first that the mirror has a heating system; then unclip the mirror support plate by pulling it forward and disconnect the power connector for the heating element; bring the new mirror close to its location to connect the connector, align the tabs with the corresponding support, and press it until it clicks into place.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

How to Replace the External Wing Mirror of the Opel Meriva
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) Below are the instructions for removing and replacing the external wing mirror of the Opel Meriva. First, open the front door and start by removing t…
Removing the External Mirror of the Opel Meriva
Removing the External Mirror of the Opel Meriva
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) This guide illustrates the main steps to remove and replace the external mirror of the Opel Meriva. First, open the front door and begin removing the…
Instructions for Dismantling External Rear-View Mirror on Opel Meriva B
Instructions for Dismantling External Rear-View Mirror on Opel Meriva B
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) In today's video, you will see the instructions that will allow you to dismantle the external rear-view mirror of an Opel Meriva B, second series. Fi…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos