Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery and Shell of the Opel Meriva Key

Model: Vauxhall Meriva Meriva A, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Key

See other generations:
Video tutorial

Let's discover in this short and simple guide how to disassemble and replace the battery and shell of the Opel Meriva key, following the instructions below. First, take your remote control and start prying on the sides to open the two parts of the remote; then remove the battery and the electronic board found inside, as shown in the video.

Once you have also removed the key from the remote, transfer everything to the new key shell; reassemble the remote, following the video until the end!


Updated on 21 May 2026 by ScegliAuto


Related tutorials

Replacing the Key Remote Battery for Opel Meriva, Astra, Zafira, Vectra
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Learn how to disassemble and replace the battery of the remote key for an Opel Meriva, as well as other models such as the Astra, Zafira, and Vectra.…
How to Replace the Key Battery of an Opel Meriva
How to Replace the Key Battery of an Opel Meriva
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) Using a flathead screwdriver, lever the rear side of the key for your Opel Meriva. Then, lift and remove the rear section that you have freed. This w…
How to Replace the Remote Key Battery of an Opel Meriva
How to Replace the Remote Key Battery of an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) How do you replace the remote key battery of an Opel Meriva? Follow this guide. Take your remote key; use a screwdriver to pry between the two parts …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos