Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery of an Opel Meriva

Model: Vauxhall Meriva MK 2, Meriva B - Years 2010-2017
Part: Key

Using a flathead screwdriver, lever the rear side of the key for your Opel Meriva. Then, lift and remove the rear section that you have freed. This will expose the exhausted battery of the key. Proceed to extract the battery from its housing in the key. Once you have removed the battery, dispose of it, and you will have completed the disassembly. To fit the new battery and close the key, follow this procedure in reverse, and the replacement will be complete.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of the Opel Meriva
How to Replace the Key Battery of the Opel Meriva
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) The video thoroughly demonstrates how to change the cover of an Opel Meriva key, including how to replace the battery. It’s quite simple: you will ne…
How to Replace the Key Battery of an Opel Meriva
How to Replace the Key Battery of an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) When the key of your Opel Meriva stops opening the car with the buttons, it means the internal battery has run out. To solve this problem, you need t…
How to Replace the Key Battery of an Opel Meriva
How to Replace the Key Battery of an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) The key of your Opel Meriva stops opening the car with the buttons because the internal battery has likely run out. To resolve this issue, you need t…

Other guides you may be interested in

    Frequently Asked Questions

    • Meriva 2003-2010 - What does the yellow car light indicate with the Opel Meriva wrench? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos