Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Meriva
    4. : How to replace the battery in the key of the Opel Meriva

Vauxhall Meriva - Video tutorial

Model: Vauxhall Meriva Meriva B, MK 2 - Years 2010-2017
Part: Key
Operation: How to replace the battery in the key of the Opel Meriva

The video shows in full how to change the cover of an Opel Meriva key including also how to change the battery key. It is very simple: you will have to equip yourself with a small lever to open the plastic element of the key. Once opened you will see the battery compartment. Remove the discharge and insert a new one. Beware of polarization because if you reverse it it may not work. Close the plastic element by fitting the two pieces well. The replacement of the battery of the key of an Opel Meriva is necessary when using the buttons on the control, they no longer work.


Posted on 26 August 2022 by ScegliAuto

    Frequently Asked Questions

    • Meriva 2010-2017 - What to do if the central locking system does not work on an Opel Meriva? Read Answer
    • Meriva 2003-2010 - How do you replace the battery in the Opel Meriva remote control? Read Answer
    • Meriva 2010-2017 - How much does the duplicate key of the Opel Meriva cost? Read Answer
    • Meriva 2010-2017 - What problem does the Opel Meriva have in the central locking? Read Answer
    • Meriva 2003-2010 - Why does the ignition lock of the Opel Meriva not work? Read Answer
    • Meriva 2010-2017 - How to replace the key shell on my Opel Meriva b? Read Answer
    • Meriva 2003-2010 - How much does it cost to duplicate the key of the Opel Meriva? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos