Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Opel Vivaro?

Model: Vauxhall Vivaro Vivaro C, MK 3 - Years 2019-2026
Part: Service warning light

To reset the Service light on the Opel Vivaro, press and hold the CHECK button located in the centre of the instrument cluster while it is off. Continue holding the button and insert the ignition key into the ignition switch to power on the instrument cluster. You will notice a countdown starting from ten on the instrument cluster; once the countdown finishes, you can release the CHECK button, and the Service light will be completely reset.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Vivaro (2014-2019 / MK 2) Resetting the service light of an Opel vehicle is a very simple and quick operation that is carried out after performing the car service. The service…
Vauxhall Vivaro (2014-2019 / MK 2) Let's see how to reset the service light on an Opel Vivaro B: turn on the instrument panel and from the wiper lever (the one on the left of the steer…
Vauxhall Vivaro (2001-2014 / MK 1) To reset the Service light on the Opel Vivaro, press the accelerator pedal while simultaneously turning the key to position two to switch on the inst…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos