Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Front Headlight on the Opel Corsa

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Headlight

This guide outlines the steps to remove and replace the front headlight on the Opel Corsa, following the instructions below. First, open the bonnet of your car and start unscrewing the fixing screws located at the top of the grille; then unscrew the additional screws found on both sides of the front wheel arches, as shown in the video. At this point, gently unclip the bumper at the sides and unscrew the screw located under the headlight; then disconnect the wiring of the bulbs and install the new headlight!

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight of an Opel Corsa
How to Replace the Front Headlight of an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before you can begin, open the front bonnet of your Opel Corsa. Start by removing the front inner wheel arches and the bumper, unscrewing the securin…
How to Remove the Front Headlight of the Opel Corsa?
How to Remove the Front Headlight of the Opel Corsa?
Vauxhall Corsa (2014-2019 / Corsa E) This guide explains how to remove and replace the front headlight of the Opel Corsa in simple and quick steps. First, open the bonnet and start unscr…
How to replace the front headlight bulb of the Opel Corsa E 2015
How to replace the front headlight bulb of the Opel Corsa E 2015
Vauxhall Corsa (2014-2019 / Corsa E) If one of the bulbs of the front headlight of your Opel Corsa E (2015) suddenly stops working, you must replace it as soon as possible with a new one…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos